Efficiency. Precision. Durability.
These are our guiding principles in order to exceed the expectations of the sophisticated jet model pilot.
Our HDS® Fans are equipped with exchangeable motors and can be purchased separately or in a setup.
DS-30-AXI HDS® (69mm)
For us at Schübeler Composite the development of our ducted fans is not a project of limited duration until the initial delivery day. It is rather seen as a constant process of improvement and innovation. That is exactly why we are now able to present the latest technology in ducted fans. Our focus is mainly on efficiency, precision and durability.
- Features -
- Lighter and remarkably shorter rotor assembly leads to a fan that runs more efficiently due to higher smoothness, as bearing and shaft have to deal with considerably less mechanical load.
- Blades made from a high-temperature resistant fibre-reinforced polymere work highly efficient, broadbandly and silently thanks to our CFD optimisation.
- Carbon Fibre shroud provides enhanced stiffness and is moulded interlockingly with the aluminum stator.
- High-precision collet chuck is clamping the rotor which results in an improved distribution of pressure in comparison to a locking screw.
- Possibility for Fine-Balancing by means of several free threads which are accessible without disassembly of the rotor. Optional mounting flanges (secure fan fix) are installed precisely guaranteeing interchangeability.
- Material Mix of CFRP, aluminum and injection moulding results in outstanding technical characteristics coupled with an excellent price-performance ratio. Failure safety of the rotor is ensured by the hub out of aircraft grade aluminum. Moreover, we refine and coat the surfaces and use special aviation glue for the joints as well as an additional screw joint. The stator consists of high-strength aircraft aluminum; that way we can provide a unique level of motor cooling.
If you decide for a ducted fan of the HDS® V2015/16 series you will receive an efficiently designed, precisely manufactured quality product aimed at long-term usability!
Technical Data DS-30-AXI HDS®:
Max. RPM: 55.000 U/min
Max. Power: 1970 W
Max. Thrust: 27 N
Max. Exhaust Speed: 87,3 m/s
weight: 55g
Max. Motor Diameter: 28 mm
Shaft Diameter: 4 mm g
Datasheet
Measurements
DS-38-AXI HDS® (80 mm)
The Little Brother Of DS-51-AXI HDS®
- Features -
- Affordable high tech 80 mm class fan
- Same efficiency and build quality as the other HDS fans
- Perfect match to HET and Tenshock motors
- Due to lower torque demand higher kV motors can be used
- Ultra failsafe design to propel your valuable jet model
Technical Data DS-38-AXI HDS®:
Max. Speed: 51,000 rpm
Max. Power: 4.630 W
Max. Thrust: 53 N
Max. Exhaust speed: 108.3 m/s
Weight: 100 g
Max. Motor diameter: 39 mm
Shaft Diameter: 5 mm
Measurements
Coming Soon
DS-51-AXI HDS® (90mm)
Efficiency. Precision. Durability.
For us at Schübeler Composite the development of our ducted fans is not a project of limited duration until the initial delivery day. It is rather seen as a constant process of improvement and innovation. That is exactly why we are now able to present the latest technology in ducted fans. Our focus is mainly on efficiency, precision and durability.
- Features -
- Lighter and remarkably shorter rotor assembly leads to a fan that runs more efficiently due to higher smoothness, as bearing and shaft have to deal with considerably less mechanical load.
- Blades made from a high-temperature resistant fibre-reinforced polymere work highly efficient, broadbandly and silently thanks to our CFD optimisation.
- Carbon Fibre shroud provides enhanced stiffness and is moulded interlockingly with the aluminum stator.
- High-precision collet chuck is clamping the rotor which results in an improved distribution of pressure in comparison to a locking screw.
- Possibility for Fine-Balancing by means of several free threads which are accessible without disassembly of the rotor. Optional mounting flanges (secure fan fix) are installed precisely guaranteeing interchangeability.
- Material Mix of CFRP, aluminum and injection moulding results in outstanding technical characteristics coupled with an excellent price-performance ratio. Failure safety of the rotor is ensured by the hub out of aircraft grade aluminum. Moreover, we refine and coat the surfaces and use special aviation glue for the joints as well as an additional screw joint. The stator consists of high-strength aircraft aluminum; that way we can provide a unique level of motor cooling.
If you decide for a ducted fan of the HDS® V2015/16 series you will receive an efficiently designed, precisely manufactured quality product aimed at long-term usability!
See the DS-51-AXI HDS in action
Technical Data DS-51-AXI HDS® (90mm):
Max. RPM: 45.000
Datasheet
Measurements
DS-51-AXI HDS / HET-650-68-1130kV
DS-51-AXI HDS / HET-650-68-1600kV
DS-51-AXI HDS / HET-700-68-1200kV
DS-51-AXI HDS / HET-700-68-2100kV
DS-51-AXI HDS / HET700-68-1400kV
DS-51-AXI HDS / HET700-68-1680kV
DS-51-AXI HDS / HET 700-68-1125kV
DS-68-AXI HDS® (110 mm)
110 MM Fan based on the technology of the 120 MM DS-86-HDS-AXI® Fan
- Features -
- Big hub means that motors with high input power can be installed
- Perfect match to the weaker HET 800 series motors
- due to lower torque demand
- Best cooling of less powerful motors due to full aluminum stator
- Works with small inlets and outlet areas
- High thrust and power capacity
Technical Data DS-68-AXI HDS®:
Max. RPM: 38,500 rpm
Max. Power: 7630 W
Max. Thrust: 94 N
Max. Exhaust Speed: 107.3 m/s
Weight: 275 g
Max. Motor Diameter: 56 mm
Shaft Diameter: 8 mm
Measurements
Coming Soon
DS-86-AXI HDS® (120mm)
Efficiency. Precision. Durability.
The 86HDS® also relies on the classical HDS® features but even adds that extra bit:
- Lighter and remarkably shorter rotor assembly
- Blades made from a high-temperature resistant fibre-reinforced polymere
- Carbon Fibre shroud
- High-precision collet chuck
- Possibility for Fine-Balancing
- Material Mix of CFRP, aluminum and injection moulding
Individual Setup
The latest version of our HDS® fans completes the series with a 120mm fan which also works ideally with Tenshock, HET and TP motors. The HDS® series is characterised by the fact that motors are freely selectable according to the customers preferences while keeping up highest efficiency levels as a result of our integral development approach. This has the advantage that you can also order a stand-alone fan in order to combine it with your existing motor. Due to our experience as well as the possibility for fine-balancing a smoothly running system is achieved. Of course, we can take care of the installation; but versed customers will also be able to conduct installation on their own.
Proven Efficiency
The fans have been combined with the above-mentioned motors forming setups that have been tested extensively until product launch. As usual at Schübeler Composite, simulations and testings were effected preceding the construction phase which corresponds to our policy of providing highest quality and efficiency levels. In here efficiency means especially to transfer low electrical power into high thrust and jet velocity. The implementation of Tenshock, HET and TP motors is only possible due to the optimum balance of rotational speed and torque.
Established Cooling
Our calculations and development work results in a product reaching perfect utilisation of the above-mentioned motors. That is why we are able to reach extremely cool running propulsion setups: the motors are not forced into a low rotational speed which is why they do not overheat. Residual heat is lead away by means of the established HDS® typical cooling.
Technical Data DS-86-AXI HDS®:
Max. RPM: 35500
Max. Power: 7500W
Max. Thrust: 101N
Max. Exhaust Speed: 99m/s
weight: 290g
Max. Motor Diameter 56mm
Shaft Diameter: 8mm g6
Datasheet
Measurements
DS-86-AXI HDS / HET800-55-675kV
DS-86-AXI HDS / HET800-60-830kV
DS-86-AXI HDS / HET800-68-685kV
DS-86-AXI HDS / HET800-73-590kV
DS-86-AXI HDS / Tenshock X501S 8Y
DS-86-AXI HDS / Tenshock X501 5,5Y